Cogeneration System Component Manufacturers in the United States

Request Information or a Price Quote from All Businesses Listed Below

Capstone Turbine Corp.

FT Energy award-winner Capstone has shipped 2,000 30- and 60-kW commercial microturbine power systems for applications ranging from hybrid electric vehicles to converting landfill gas and other waste gases into electricity. The systems are CSA, CE and UL-Listed (2200 and 1741), have just one moving part, use no oil, no lubricants, no coolants and are designed to operate at continuous full load or load-follwing (down to 0 kW idle) 24/7/365, on or off grid. NOx emissions are significantly below any US and foreign standards. These lightweight, compact microturbines can be multipacked into n+x arrays of up to 100 units with no paralleling switchgear, all with single-point-access dispatching/diagnostics. Conforms to IEEE and ANSI specs; UL 1741/CA Rule 21 compliant grid interconnect functionality (including protective relays) is built in. 8,000-hour annual maintenance comprises air and fuel filter inspection/replacement; temp sensor and ignitor every two years. En!!gine overhaul suggested at 40,000 hours. Fuels: natural gas, propane, high and low Btu waste gases (as low as 350 Btu) with up to 7% hydrogen sulfide content, diesel and kerosene.

• Stock Symbol: Nasdaq : CPST
• Business type: manufacturer
• Product types: micro-cogeneration systems, gas microturbine electric generators, hybrid electric vehicle power systems.
• Address: 21211 Nordhoff Street, Chatsworth, California USA 91311
• Telephone: 818-734-5300
• FAX: 818-734-5320
• Web Site: http://www.microturbine.com
• E-mail: Send Email to Capstone Turbine Corp.

Johnson Bros Metal Forming Co

Custom roll forming in all metals for the Solar Industry: U-channels, C-channels, hat channels, box & strut channels, angles, zees, mouldings, profiles, tracks, slides, purlins, louvers, slats, strips, panels, framing, rings, rims, ring clamps, tubing in: open seam, lock seam, split seam, in special shapes. Veteran owned. 20+ lines. Inline fabrications: holes, slots, end fabricating, cut-to-length, notching, cutouts, shear forms, miters, deburring, ring bending, sweeps, embossing, perforating, tabs. Prefinishes available: galvanized, prepolished, preplated, prepainted, preanodized, prelaminated, aluminized, strippable-pvc, embossed. 2, 000ft minimum

• Business type: manufacturer
• Product types: Aluminum Solar Panel Frames, Solar Panel Components, solar water heating components, geothermal energy system components, air cooling system components, hydro energy system components (small), cogeneration system components, hydro energy system components (large).
• Service types: Metal Rolled Formed Parts
• Address: 5520 McDermott Drive, Berkeley, Illinois USA 60163
• Telephone: 708-449-7050
• FAX: 708-449-0042
• Web Site: http://www.johnsonrollforming.com/Solar-Panel-Frames.htm
• E-mail: Send Email to Johnson Bros Metal Forming Co

4Norpro Diesel Generators 5KW - 400KW & Alt Fuel 13KW - 120KW

• Business type: manufacturer, wholesale supplier, exporter
• Product types: Isuzu Diesel Generators 12KW - 60KW , Yanmar Diesel Generators 5kw - 45KW , Kubota Diesel Generators 12KW - 45KW , John Deere Diesel Generators 30KW- 400KW , Ford Generators, GM Generators, fuel powered electric generators, fuel powered electric generators, cogeneration system components, Diesel generators , marine & Industrial home uses portables. Alternate fuel generators..
• Address: 385 Town St, East Haddam, Connecticut USA 06423
• Telephone: 860-873-0100
• FAX: 860-873-0200

Adsorption Chiller

• Business type: manufacturer, wholesale supplier
• Product types: air cooling system components, biomass energy system components, cogeneration system components, energy efficient homes and buildings, fuel cell system components, geothermal energy system components, Solar cooling component.
• Address: P.O. BOX 820307, Houston, Texas USA 77282-0307
• Telephone: 281-404-5471
• FAX: 281-754-4383

Advanced Turbine Products, LLC

• Business type: manufacturer, wholesale supplier
• Product types: gas turbine electric generators, cogeneration systems, Aftermarket gas turbine replacement parts - buckets, nozzles, blades, vanes, and combustion systems for gas turbines manufactured by GE, SW, Alstom, P&W, Siemens.
• Address: 7289 Garden Road, Suite 103, Riviera Beach, Florida USA 33404
• Telephone: 561-844-2800

Amer Industrial Technologies, Inc.

• Business type: manufacturer, exporter
• Product types: heat exchangers, water storage tanks, cogeneration system components, energy efficient homes and buildings.
• Address: 100 Amer Rd., Bldg. 200, Wilmington, Delaware USA 19809
• Telephone: 302-765-3900

American Photovoltaics & Homes, Ltd.

• Business type: manufacturer, wholesale supplier, retail sales
• Product types: Environmentally Friendly & Renewable Energy Homes, energy efficient buildings, hydrogen power systems, alternative construction. Also, water pumping and desalination. Also, thermal electric. .
• Service types: Building & Construction Managers (Renewable Energy)
• Address: 5951 Riverdale Avenue-Suite 1199, Riverdale, New York USA 10471
• Telephone: (718) 548-0428
• FAX: Web Site: Americanphotovoltaichomes. com

Arrow Industries, Inc.

• Business type: manufacturer
• Product types: Engineered Foundation Repair, Design & Products for Critical Equipment Epoxy Grouts, Anchor bolts, Adjustable Chocks.
• Service types: engineering, epoxy grouts, fast setting polymer modified concrete
• Address: 520 Kelly Lane, Louisiana, Texas USA 63353
• Telephone: 713-203-7678
• FAX: 713-789-6073

Canton Drop Forge

• Business type: manufacturer
• Product types: cogeneration system components, steam turbine electric generators, uninterruptible power supplies UPS, wind energy system components (large), wind energy system components (small), CDF produces premium quality airfoil forgings for all sizee of steam turbines and gas turbine compressor sections.
• Address: 4575 Southway St. SW, Canton, Ohio USA 44706
• Telephone: 330-477-4511

Cooper Electric Supply Company

• Business type: manufacturer, retail sales, service, exporter, contractor, construction, engineering
• Product types: fuel powered electric generators, cogeneration systems, cogeneration system components, packaged power systems, alternative home and building construction materials, emergency backup batteries, Y2K and emergency preparedness supplies.
• Address: 1924 Heck Avenue, Neptune, New Jersey USA 07753
• Telephone: 732-774-1058 or toll free 800-216-7851
• FAX: 732-774-8334

Craft Bearing Company, Inc.

• Business type: manufacturer
• Product types: Manufacture split roller bearings for vertical and horizontal hydros, micro, small, medium size. Fans, conveyors, pulverizers, stokers, line shafts. Consider split bearings in trapped positions. .
• Service types: split roller bearings
• Address: 5000 Chestnut Ave. , Newport News, Virginia USA 23605
• Telephone: 757-247-6000
• FAX: 757-247-6300

Danotek Motion Technologies

• Business type: Permanent Magnet Generator/Power Electronics Manufacturer
• Product types: Permanent Magnet Generators upto 3 MW Full Power Electronics Variable Speed Permanent Magnet Motors Electro-Hydraulic Power Steering Pumps for Electric Vehichles and Hybrids.
• Service types: Engineering
• Address: 8780 N. Haggerty Road, Canton, Michigan USA 48187
• Telephone: 734-426-5976
• FAX: 734-424-1202

e4 Solutions

• Business type: manufacturer
• Product types: backup power systems, cogeneration system components, fuel cell system components, packaged power systems, photovoltaic module components, wind energy systems (large), Manufacturers of power quality, distributed generation and power distribution integrated technologies.
• Address: 1187 First Street, Monterey, California USA 93940
• Telephone: 831 333 9734
• FAX: 831 642 9621

Energy Products of Idaho (EPI)

• Business type: manufacturer
• Product types: biomass energy systems, cogeneration systems, biomass energy system components, biomass energy boilers, cogeneration system components.
• Service types: design, installation, construction, engineering, research services
• Address: 3568 W Industrial Loop, Coeur d Alene, Idaho USA 83815-6016
• Telephone: 208-765-1611
• FAX: 208-765-0503

ETS Power Group

• Business type: manufacturer, wholesale supplier
• Product types: gas turbine electric generators, cogeneration system components, AFTERMARKET GAS TURBINE REPLACEMENT PARTS - BUCKETS, NOZZLES, BLADES, VANES, COMBUSTION SYSTEMS, ALL MAKES ENGINEERED--GE, WEST, ABB, SIEMENS, ALSTOM.
• Address: 2400 SE Monterey Road, Suite 101, Stuart, Florida USA 34996
• Telephone: +1 772.781.3883

eTurbines, Inc.

• Business type: service
• Product types: cogeneration system components, gas turbine electric generators, large hydroelectric turbines (> 50 kW), hydro energy system components (small), steam turbine electric generators, fuel powered electric generators.
• Address: 3030 Greens Road, Houston, Texas USA 77032
• Telephone: (281) 442-2700
• FAX: (281) 590-2233

Georgia Adobe LP. Rammed Earth & Renewable Energy

• Business type: Multinational, Green Design & Build Company
• Product types: Complete Turn Key Totally Eco-Friendly Designers & Builders That Also Can Custom Make Adobe & Rammed Earth Mixes For The Structures We Build And We Sell Our Clients All The Related Equipment Our Structures Might Need. We Have A Pest Control Products Web Site In Addition So Check Us Out On The Web : Search For Our Companies Name "Georgia Adobe" and we are a dot com.
• Service types: Designers, Builders, Educators, of Rammed Earth Carbon -0- Self-Sustainable off-grid Structures built from Earth & Recycled Materials
• Address: 231 Harris Lord Cemetery Road, Commerce, Georgia USA 30530
• Telephone: 706-363-6453

JX Crystals, Inc.

• Business type: manufacturer
• Product types: photovoltaic concentrator modules, trackers, system installation.
• Address: 1105 12th Avenue NW Suite A2, Issaquah, Washington USA 98027
• Telephone: 425-392-5237
• FAX: 425-392-7303

McMillan Company

• Business type: manufacturer
• Product types: fuel cell system components, water filtering and purification system components, cogeneration system components, meters and measuring equipment.
• Address: 7075 RR 2338, Georgetown, Texas USA 78628
• Telephone: 800-861-0231, 512-863-0231

Metex Corporation

• Business type: manufacturer
• Product types: cogeneration system components, hydro energy system components (large), air filtering and purification system components, geothermal energy system components, computer and electronic components, water filtering and purification system components, Seals, Breathers, Coalescers, Filters, Mufflers, Gaskets, Noise Attenuators.
• Address: 970 New Durham Road, Edison, New Jersey USA 08818
• Telephone: 732-287-0800

Smart Power Systems

• Business type: manufacturer
• Product types: DC to AC power inverters, DC to DC power converters, battery chargers, cogeneration system components, fuel cell system components, wind energy system components (small), AC to DC & AC to AC Power supplies,frequency changers,static phase converters,Three phase power factor correction modules..
• Service types: manufacturing, design & custom applications of power electronic equipment
• Address: 1107 Middle River Road # 8, Baltimore, Maryland USA 21220
• Telephone: 410-391-9881
• FAX: 410-391-9811

Sonat Power Systems

• Business type: manufacturer
• Product types: fuel powered backup generators, cogeneration systems, gas microturbine electric generators.
• Address: 1900 5th Ave North, Birmingham, Alabama USA 35203
• Telephone: 205-326-2085 or toll free 888-KWTURBO
• FAX: 205-325-3812

Span-O-Matic

• Business type: manufacturer
• Product types: cogeneration system components, wind energy system components (large), photovoltaic module mounting systems, photovoltaic module components, air filtering and purification system components, battery enclosures, custom metal fabrication, laser cutting, electrical enclosures, cabinets, parts to print.
• Address: 825 Columbia St, Brea, California USA 92821
• Telephone: 714-256-4700
• FAX: 714-256-4401

Stork H&E Turbo Blading, Inc

• Business type: manufacturer
• Product types: Steam turbine blades & buckets, gas turbine compressor rotor & stator blades, inlet guide vanes, axial compressor & blower blades.
• Service types: manufacturing
• Address: 334 Comfort Rd, Ithaca, New York USA 14850
• Telephone: 607-277-4968 X292
• FAX: 607-277-1193 (attention: JOE W)

Sunpower Inc

Sunpower is the world's leading developer of free-piston machines. For over 30 years, Sunpower has provided collaboration, design, application and commercialization of our unique technology to clients worldwide. Today, Sunpower-enabled products include innovative Stirling engines, coolers, cryocoolers and compressors integrated into environmentally friendly, long-lived, high efficiency solutions. Applications include household refrigerators and cogeneration units, aerospace and military electric generators, medical devices, and nuclear material detection devices. Sunpower offers technology partnering opportunities, research and development expertise, and a range of high-performing cryocoolers.

• Business type: Engineering, Cryocooler Manufacturer
• Product types: cogeneration system components, remote home power systems, backup power systems, thermoelectric power conversion, biomass energy system components, air cooling system components, Cryocoolers Using technology related to: * Free-piston Stirling engines * Cryocoolers * Pulse Tubes * Linear compressors.
• Service types: engineering, research services
• Address: 184 Mill Street, Athens, Ohio USA 45701
• Telephone: 7405942221
• FAX: 7405937531

Sustainable Automation, Inc.

• Business type: system integrator, control system manufacturer
• Product types: wind-diesel hybrid village power systems, PV-diesel hybrid power systems, telecom power systems, remote monitoring systems.
• Service types: System integration, feasibility studies
• Address: 3131 N. 75th St. , Boulder, Colorado USA 80301
• Telephone: 1-303-996-0647
• FAX: 1-303-996-4610

Turbo Power - Turbomachinery Products & Services

• Product types: Flexible Couplings (Gear, Disc Pack, Diaphragm) Accessory & Load For GE Industrial Gas Turbines (F3, F5, F6, F7, F9) Also Babbitted Bearings, Labyrinth Seals, Oil Deflectors. .
• Address: 116 Canal Drive, Friendswood, Texas USA 77546
• Telephone: 281-585-5635
• FAX: 309-213-0126

Unified Machine & Design, Inc

• Business type: manufacturer
• Product types: photovoltaic cell manufacturing equipment, air heating system components, cogeneration system components, composting system components, electric vehicle components.
• Address: 271 Lincoln Boulevard, Middlesex, New Jersey USA 08846
• Telephone: 800 260-2692
• FAX: 732 469-2484

Warren Environmental Equipment Inc.

• Business type: manufacturer
• Product types: biomass energy system components, air filtering and purification systems, air filtering and purification system components, cogeneration system components, geothermal energy system components, heat exchangers, Air Pollution Control Systems.
• Address: 5075 Roswell Road, Atlanta, Georgia USA 30342
• Telephone: 4048438333