Fuel Cell System Component Manufacturers in the United States

Proton Energy Systems, Inc. - Adsorption Chiller - Allied Motion Technologies Inc - CRI Catalyst Company - Danotek Motion Technologies - Ion Power, Inc - NuVant Systems Inc. - REB Research & Consulting - Smart Power Systems - VAIREX air systems - Zahn Electronics, Incorporated - ZIRCAR Ceramics, Inc - ZIRCAR Refractory Composites Inc. (ZRCI) - Zircar Zirconia, Inc. - CISMarket - DC Fabricators Inc - McMillan Company - Structural Composites Industries (SCI) - Vermont Fuel Cell/Div. of GICS -

Proton Energy Systems, Inc.

Located in a modern 100,000 square foot manufacturing facility in Wallingford, CT, Proton Energy Systems, Inc. (PROTON) is dedicated to the manufacture of cost effective Proton Exchange Membrane (PEM) hydrogen products using state-of-the-art engineering and manufacturing processes.

Adsorption Chiller

ADSORPTION CHILLER. Doubts regarding absorption chillers? Now, efficient energy conservation utilizing a waste heat driven ADsorption Chiller is attainable, which can replace an absorption chiller. It has tremendous flexibility, controlling down to "0%" load, without three-way control valves. It can produce chilled water temperatures down to 37o.4F. It can use variable hot water flows and temperatures ranging from 194 to as low as 122oF. Cooling water temperatures do not require controlling. It can be ran 24/7 year around with negligible maintenance and is available with a 15 year limited warranty. HIJC USA introduces new low temperature chiller down to 23F. WEB Site http://www.adsorptionchiller.com

Allied Motion Technologies Inc

Allied Motion is a global company headquartered in the U. S. that is focused exclusively on serving the motion control market. Allied Motion designs and manufactures motor and electronic motion control products for a broad range of industries in the commercial, industrial, vehicle, and aerospace and defense sectors.

CRI Catalyst Company

Custom manufacturer of specifically tailored hydrocarbon reforming catalyst products for natural gas, LPG, naphtha and diesel feeds. Featuring high efficiency HDS, CPO and ATR catalysts for primary and pre-reforming reactions, PrOx and post combustion/incineration catalysts. Custom catalyst powders can be provided or applied to finished products based upon spheres, extrudates, monoliths, ceramic or metallic foams, wire, etc.

Danotek Motion Technologies

Developer and manufacturer of high efficiency and power density Permanent Magnet Generators and Variable Speed Brushless Motors that are ideally suited for Alternative Energy initiatives in power generation and transportation. If lighter weight, longer rated life, greater efficiency, minimal starting inertia and a fully optimized component, based on your system requirements, are critical for your project, contact us for additional information.

Ion Power, Inc

Manufacturer of High Power Density Catalyst Coated Fuel Cell and Electrolyzer Membranes based on the NAFION(tm) membranes. World-wide Distributor of NAFION(tm) membranes and LIQUION NAFION(tm) Solutions. Membrane thickness available down to 25 microns. Low Methanol Cross-over Direct Methanol Membranes.

NuVant Systems Inc.

NuVant Systems develops and licenses advanced fuel cell components and component evaluation instrumentation. We specialize in fully automated high throughput screening equipment for fuel cell components and are developing fully automated test stands for single cells. Our components are designed to help drive commercialization of fuel cells in stationary and portable power markets. We develop cost effective, innovative technologies that will assist fuel cell manufacturers in bringing fuel cells to market, and fuel cell researchers in rapidly improving fuel cell materials. Our research and development efforts and technology are focused in the following areas: fuel cell catalyst discovery and development; intermediate temperature fuel cells; fuel cell membrane electrode assemblies; direct methanol fuel cells; high throughput screening equipment. NuVant Systems Inc. provides in-house expertise in fuel cell technology, catalysis, and analytical chemistry throu!gh contract services. NuVant's special expertise encompasses four areas: high throughput materials development, fuel cell testing, heterogeneous catalyst development, and high-resolution component detection/analysis . NuVant initiates contracts with clients based on initial consultations. Contract services remain confidential, subject to client wishes.

REB Research & Consulting

REB Research & Consulting specializes in hydrogen separation and membrane reactors.

Smart Power Systems

VAIREX air systems

VAIREX develops and manufactures proprietary air management systems consisting of proprietary regenerative blowers integrated with brushless DC motors, electronic motor controls and software. VAIREX products are the technical leaders in the industry, with higher pressure capability, much lower power consumption, reduced size and weight, and better durability than the alternatives. The Company is developing a line of new higher-performance, cost-reduced products for fuel cells rated from 1 to 50 kW, and is currently shipping samples of the first three models.

Zahn Electronics, Incorporated

Zahn Electronics Inc., founded in 1977, is located between Chicago and Milwaukee. David Zahn, the President and founder, is proud of the company commitment to manufacture the highest quality, most robust, Power Conversion Products, which will last beyond the useful lifetime of the product. All units have heavy filtering at the input so that no external filtering is necessary. All units are designed and manufactured in Wisconsin, USA. Our Products are 2 and 4 quadrant Servo Amplifiers that have many markets, including AGV (Automatic Guided Vehicles) Traction and Steering Controls, Electric Vehicle Drives, Fuel Cell DC/DC Converters, High Power DC/DC Converters, Incandescent Lamp Regulators, DC Power Supplies that run off of batteries, and . ...

ZIRCAR Ceramics, Inc

ZIRCAR Refractory Composites Inc. (ZRCI)

ZIRCAR Refractory Composites, Inc.(ZRCI) produces a comprehensive line of advanced high performance ceramic-ceramic composite materials and related products. Our materials are used around the world in the most demanding thermal, structural and electrical insulating applications ranging in temperatures from 600°C(1112°F) to 1650°C(3002°F). For over twenty-five years, we have been a problem-solver working with our customers to resolve their thermal management problems. We have developed products that have become industry standards for induction melting, forging and heat treating applications, investment casting, glass processing, hot pressing, as well as many high temperature electrical applications. Product forms include rigidizers, coatings, textiles, blankets, moldables, boards, disks and cylinders composed of alumina, alumina-silica and other ceramic compositions. Standard sizes of most materials are available from stock for rapid shipment. Custom formed and precision machined shapes are available.

Zircar Zirconia, Inc.

Provider of thermal insulation solutions to researchers, manufacturers and product developers. Manufacture thermal insulation products including ceramic fiber boards, blankets, textiles and cylinders. Specialists in high temperature insulation for applications up to 2400 Celsius.

CISMarket

DC Fabricators Inc

McMillan Company

Structural Composites Industries (SCI)

Vermont Fuel Cell/Div. of GICS

Not Listed? Add your business listing to the Source Guides business directory

Can't Find It? Search the entire Source Guides site using keywords:

Momentum Technologies LLC

©1995-2016 All Rights Reserved