Source Guides Renewable Energy Renewable Energy Businesses Renewable Energy Businesses in the World by Location Renewable Energy Businesses in the United States Renewable Energy Businesses in the United States by Product Type Cogeneration System Component Businesses in the United States Cogeneration System Component Businesses in the United States by Business Type Cogeneration System Component Manufacturers in the United States

Cogeneration System Component Manufacturers in the United States


Request Information or a Price Quote from All Businesses Listed Below

Request Information or a Price Quote from All Businesses Listed Below

Capstone Turbine Corp. - Johnson Bros Metal Forming Co - Adsorption Chiller - American Photovoltaics & Homes, Ltd. - Cooper Electric Supply Company - Danotek Motion Technologies - eTurbines, Inc. - Georgia Adobe - JX Crystals, Inc. - Outotec Energy Products (formerly Energy Products of Idaho - EPI) - Smart Power Systems - Span-O-Matic - Stork H&E Turbo Blading, Inc - Sustainable Power Systems, Inc. - Turbo Power - Turbomachinery Products & Services - 4Norpro Diesel Generators 5KW - 400KW & Alt Fuel 13KW - 120KW - Advanced Turbine Products, LLC - Canton Drop Forge - Craft Bearing Company, Inc. - ETS Power Group - McMillan Company - Metex Corporation - Sunpower Inc - Warren Environmental Equipment Inc. -

Capstone Turbine Corp.

FT Energy award-winner Capstone has shipped 2,000 30- and 60-kW commercial microturbine power systems for applications ranging from hybrid electric vehicles to converting landfill gas and other waste gases into electricity. The systems are CSA, CE and UL-Listed (2200 and 1741), have just one moving part, use no oil, no lubricants, no coolants and are designed to operate at continuous full load or load-follwing (down to 0 kW idle) 24/7/365, on or off grid. NOx emissions are significantly below any US and foreign standards. These lightweight, compact microturbines can be multipacked into n+x arrays of up to 100 units with no paralleling switchgear, all with single-point-access dispatching/diagnostics. Conforms to IEEE and ANSI specs; UL 1741/CA Rule 21 compliant grid interconnect functionality (including protective relays) is built in. 8,000-hour annual maintenance comprises air and fuel filter inspection/replacement; temp sensor and ignitor every two years. En!!gine overhaul suggested at 40,000 hours. Fuels: natural gas, propane, high and low Btu waste gases (as low as 350 Btu) with up to 7% hydrogen sulfide content, diesel and kerosene.

Stock Symbol: Nasdaq : CPST
Business type: manufacturer
Product types: micro-cogeneration systems, gas microturbine electric generators, hybrid electric vehicle power systems.
Address: 21211 Nordhoff Street, Chatsworth, California USA 91311
Telephone: 818-734-5300
FAX: 818-734-5320
Web Site: http://www.microturbine.com
E-mail: Send Email to Capstone Turbine Corp.

Johnson Bros Metal Forming Co

Custom roll forming in all metals for the Solar Industry: U-channels, C-channels, hat channels, box & strut channels, angles, zees, mouldings, profiles, tracks, slides, purlins, louvers, slats, strips, panels, framing, rings, rims, ring clamps, tubing in: open seam, lock seam, split seam, in special shapes. Veteran owned. 20+ lines. Inline fabrications: holes, slots, end fabricating, cut-to-length, notching, cutouts, shear forms, miters, deburring, ring bending, sweeps, embossing, perforating, tabs. Prefinishes available: galvanized, prepolished, preplated, prepainted, preanodized, prelaminated, aluminized, strippable-pvc, embossed. 2, 000ft minimum

Business type: manufacturer
Product types: Aluminum Solar Panel Frames, Solar Panel Components, solar water heating components, geothermal energy system components, air cooling system components, hydro energy system components (small), cogeneration system components, hydro energy system components (large).
Service types: Metal Rolled Formed Parts
Address: 5520 McDermott Drive, Berkeley, Illinois USA 60163
Telephone: 708-449-7050
FAX: 708-449-0042
Web Site: http://www.johnsonrollforming.com/Solar-Panel-Frames.htm
E-mail: Send Email to Johnson Bros Metal Forming Co

Adsorption Chiller

ADSORPTION CHILLER. Doubts regarding absorption chillers? Now, efficient energy conservation utilizing a waste heat driven ADsorption Chiller is attainable, which can replace an absorption chiller. It has tremendous flexibility, controlling down to "0%" load, without three-way control valves. It can produce chilled water temperatures down to 37o.4F. It can use variable hot water flows and temperatures ranging from 194 to as low as 122oF. Cooling water temperatures do not require controlling. It can be ran 24/7 year around with negligible maintenance and is available with a 15 year limited warranty. HIJC USA introduces new low temperature chiller down to 23F. WEB Site http://www.adsorptionchiller.com

Business type: manufacturer, wholesale supplier
Product types: air cooling system components, biomass energy system components, cogeneration system components, energy efficient homes and buildings, fuel cell system components, geothermal energy system components, Solar cooling component.
Address: P.O. BOX 820307, Houston, Texas USA 77282-0307
Telephone: 281-404-5471
FAX: 281-754-4383
Web Site: http://www.adsorptionchiller.com
E-mail: Send Email to Adsorption Chiller

American Photovoltaics & Homes, Ltd.

Our houses and structures are benign, low emission units that help reduce CO2 and related toxins and CFC emissions into the atmosphere. They are also competitively priced for the lower Westchester-Greenwich, Connecticut area. Our houses at the present time have the ability to reduce the homeowners electrical, heating and air conditioning costs by 75-80 percent; as our total systems are 85% efficient verses utility efficiency of only 28%. On average one of our 3000 SF houses will eliminate at least 60, 000 pounds(30 tons) of toxic emission per year from the atmosphere. With the advent of ethanol and/or butonol into NY and Connecticut by the year 2012 our houses will have 0 toxic emissions and will have the alternative to run 100% independent...

Business type: manufacturer, wholesale supplier, retail sales
Product types: Environmentally Friendly & Renewable Energy Homes, energy efficient buildings, hydrogen power systems, alternative construction. Also, construction management and building alterations. .
Service types: Building & Construction Managers (Renewable Energy)
Address: 5951 Riverdale Avenue-Suite 1199, Riverdale, New York USA 10471
Telephone: (718) 548-0428
FAX: Web Site: Americanphotovoltaichomes. com
Web Site: Americanphotovoltaichomes.com
E-mail: Send Email to American Photovoltaics & Homes, Ltd.

Cooper Electric Supply Company

An interruption to service can bring your facility to a standstill- even risk the safety of associates, customers and your loved ones. As reliable as a utility power can be, you simply can't afford to gamble. Since 1966, Cooper Power Systems has provided emergency back-up and temporary electrical power to millions of customers. Honored as one of the nation's premier distributors of KOHLER Generators, Cooper has built a reputation for meticulous care and on-the-spot service in critical conditions.

Business type: manufacturer, retail sales, service, exporter, contractor, construction, engineering
Product types: fuel powered electric generators, cogeneration systems, cogeneration system components, packaged power systems, alternative home and building construction materials, emergency backup batteries, Y2K and emergency preparedness supplies.
Address: 1924 Heck Avenue, Neptune, New Jersey USA 07753
Telephone: 732-774-1058 or toll free 800-216-7851
FAX: 732-774-8334
Web Site: http://www.coopergenerators.com
E-mail: Send Email to Cooper Electric Supply Company

Danotek Motion Technologies

Developer and manufacturer of high efficiency and power density Permanent Magnet Generators and Variable Speed Brushless Motors that are ideally suited for Alternative Energy initiatives in power generation and transportation. If lighter weight, longer rated life, greater efficiency, minimal starting inertia and a fully optimized component, based on your system requirements, are critical for your project, contact us for additional information.

Business type: Permanent Magnet Generator/Power Electronics Manufacturer
Product types: Permanent Magnet Generators upto 3 MW Full Power Electronics Variable Speed Permanent Magnet Motors Electro-Hydraulic Power Steering Pumps for Electric Vehichles and Hybrids.
Service types: Engineering
Address: 8780 N. Haggerty Road, Canton, Michigan USA 48187
Telephone: 734-426-5976
FAX: 734-424-1202
Web Site: http://www.danotekmotion.com
E-mail: Send Email to Danotek Motion Technologies

eTurbines, Inc.

World's largest on-line database of turbomachinery, related parts and services for the Power Generation Industry.

Business type: service
Product types: cogeneration system components, gas turbine electric generators, large hydroelectric turbines (> 50 kW), hydro energy system components (small), steam turbine electric generators, fuel powered electric generators.
Address: 3030 Greens Road, Houston, Texas USA 77032
Telephone: (281) 442-2700
FAX: (281) 590-2233
Web Site: http://eturbines.com
E-mail: Send Email to eTurbines, Inc.

Georgia Adobe

Were Rogue Eco-Architects & Builders of Ultra-Green Independent, Off Grid, Carbon -0-, Totally Self Sustainable Homes &/or Commercial Buildings, Were Green Industry Consultants & Educators, Builders & designers of Alcohol Fuel Energy Systems. From Rammed Earth & Up To 80% Local &/or Recycled Materials We build Structures that heat & cool themselves capture rainfall and snow melt, grow food inside and handle all their waste water on site. We Also Custom Build And Install, All The Required Equipment For Our Structures.

Business type: Multinational, Green Design & Build Company
Product types: Georgia Adobe, Modern Earth Sheltered, Rammed Earth, Passively Solar & Defensible, Off Grid Structures, & Alternative Energy Systems.
Service types: Designers, Builders, Educators, of Rammed Earth Carbon -0- Self-Sustainable off-grid Structures.
Address: Georgia USA
Telephone: 706-363-6453
Web Site: http://www.georgiaadobe.com
E-mail: Send Email to Georgia Adobe

JX Crystals, Inc.

JX Crystals manufactures and installs low cost 3 Sun PV concentrator modules with trackers.

Business type: manufacturer
Product types: photovoltaic concentrator modules, trackers, system installation.
Address: 1105 12th Avenue NW Suite A2, Issaquah, Washington USA 98027
Telephone: 425-392-5237
FAX: 425-392-7303
Web Site: http://www.jxcrystals.com
E-mail: Send Email to JX Crystals, Inc.

Outotec Energy Products (formerly Energy Products of Idaho - EPI)

Business type: manufacturer
Product types: biomass energy systems, cogeneration systems, biomass energy system components, biomass energy boilers, cogeneration system components.
Service types: design, installation, construction, engineering, research services
Address: 3568 W Industrial Loop, Coeur d Alene, Idaho USA 83815-6016
Telephone: 208-765-1611
FAX: 208-765-0503
Web Site: www.energyproducts.com
E-mail: Send Email to Outotec Energy Products (formerly Energy Products of Idaho - EPI)

Smart Power Systems

Business type: manufacturer
Product types: DC to AC power inverters, DC to DC power converters, battery chargers, cogeneration system components, fuel cell system components, wind energy system components (small), AC to DC & AC to AC Power supplies,frequency changers,static phase converters,Three phase power factor correction modules..
Service types: manufacturing, design & custom applications of power electronic equipment
Address: 1107 Middle River Road # 8, Baltimore, Maryland USA 21220
Telephone: 410-391-9881
FAX: 410-391-9811
Web Site: http://www.smartpowerusa.com
E-mail: Send Email to Smart Power Systems

Span-O-Matic

Span-O-Matic is a precision metal fabricator located in Brea, CA. We can shear, CNC punch, laser cut, form, weld and finish steel, stainless and aluminum. We work for material as thin as . 001" to . 875" thick steel. We build exactly to your drawing and specifications. Span-O-Matic makes electrical enclosures, weldments, chassis, reserviors, brackets and frames.

Business type: manufacturer
Product types: cogeneration system components, wind energy system components (large), photovoltaic module mounting systems, photovoltaic module components, air filtering and purification system components, battery enclosures, custom metal fabrication, laser cutting, electrical enclosures, cabinets, parts to print.
Address: 825 Columbia St, Brea, California USA 92821
Telephone: 714-256-4700
FAX: 714-256-4401
Web Site: http://spanomatic.com
E-mail: Send Email to Span-O-Matic

Stork H&E Turbo Blading, Inc

The Stork Turbo Blading Group is the oldest and largest independent turbine blading manufacturer in the world, with 3 facilities and a combined 80 years of experience. Steam turbine blades & buckets, gas turbine compressor rotor & stator blades, inlet guide vanes, axial compressor & blower blades. All OEM models, faster and at lower cost than the OEMs.

Business type: manufacturer
Product types: Steam turbine blades & buckets, gas turbine compressor rotor & stator blades, inlet guide vanes, axial compressor & blower blades.
Service types: manufacturing
Address: 334 Comfort Rd, Ithaca, New York USA 14850
Telephone: 607-277-4968 X292
FAX: 607-277-1193 (attention: JOE W)
Web Site: www.he-machinery.com
E-mail: Send Email to Stork H&E Turbo Blading, Inc

Sustainable Power Systems, Inc.

Sustainable Power Systems, Inc. is a leading manufacturer of control systems both remote (off-grid) and grid-tied microgrids for community, island, commercial, and industrial applications. We specialize in hybrid power systems combining wind turbines, solar PV, and other forms of generation, such as diesel and natural gas generator sets, microturbines, and fuel cells. We design the optimal hybrid power system to meet the customer's cost, fuel savings, and environmental goals. Wherever possible, excess wind energy and waste heat is captured to serve a wide variety of secondary loads, which may include water heating and chilling, water pumping, water purification, and ice making. For further information, please call or visit our website.

Business type: system integrator, control system manufacturer
Product types: wind-diesel hybrid village power systems, PV-diesel hybrid power systems, telecom power systems, remote monitoring systems, synchronous condensers, battery/inverter systems, secondary load controllers.
Service types: System integration, feasibility studies, preliminary design
Address: 3131 N. 75th St. , Boulder, Colorado USA 80301
Telephone: 1-303-442-4910
FAX: 1-303-442-4914
Web Site: http://www.SustainablePowerSystems.com
E-mail: Send Email to Sustainable Power Systems, Inc.

Turbo Power - Turbomachinery Products & Services

Replacement power transmission lubricated and dry couplings for Koppers, Kop-Flex, Sier-bath, Zurn, Ameridrives, Ameriflex, Bendix, Lucas, TRW, Sierbath, Thomas, Goodrich, Amerigear, Deck, Poole, Rexnord, Waldron, Flexibox, Eagle, Renk Tacke, Esco, Flex Element, Falk, TB Woods, Shackelford-Wattner, Texas Custom Builders, Centritech, TurboFlex, Centriflex, BHS, Dana, Dodge, Fast, TurboCare, & Metastream.

Product types: Flexible Couplings (Gear, Disc Pack, Diaphragm) Accessory & Load For GE Industrial Gas Turbines (F3, F5, F6, F7, F9) Also Babbitted Bearings, Labyrinth Seals, Oil Deflectors. .
Address: 116 Canal Drive, Friendswood, Texas USA 77546
Telephone: 281-585-5635
FAX: 309-213-0126
Web Site: www.turbopower.info
E-mail: Send Email to Turbo Power - Turbomachinery Products & Services

4Norpro Diesel Generators 5KW - 400KW & Alt Fuel 13KW - 120KW

Business type: manufacturer, wholesale supplier, exporter
Product types: Isuzu Diesel Generators 12KW - 60KW , Yanmar Diesel Generators 5kw - 45KW , Kubota Diesel Generators 12KW - 45KW , John Deere Diesel Generators 30KW- 400KW , Ford Generators, GM Generators, fuel powered electric generators, fuel powered electric generators, cogeneration system components, Diesel generators , marine & Industrial home uses portables. Alternate fuel generators..
Address: 385 Town St, East Haddam, Connecticut USA 06423
Telephone: 860-873-0100
FAX: 860-873-0200

Advanced Turbine Products, LLC

Business type: manufacturer, wholesale supplier
Product types: gas turbine electric generators, cogeneration systems, Aftermarket gas turbine replacement parts - buckets, nozzles, blades, vanes, and combustion systems for gas turbines manufactured by GE, SW, Alstom, P&W, Siemens.
Address: 7289 Garden Road, Suite 103, Riviera Beach, Florida USA 33404
Telephone: 561-844-2800

Canton Drop Forge

Business type: manufacturer
Product types: cogeneration system components, steam turbine electric generators, uninterruptible power supplies UPS, wind energy system components (large), wind energy system components (small), CDF produces premium quality airfoil forgings for all sizee of steam turbines and gas turbine compressor sections.
Address: 4575 Southway St. SW, Canton, Ohio USA 44706
Telephone: 330-477-4511

Craft Bearing Company, Inc.

Business type: manufacturer
Product types: Manufacture split roller bearings for vertical and horizontal hydros, micro, small, medium size. Fans, conveyors, pulverizers, stokers, line shafts. Consider split bearings in trapped positions. .
Service types: split roller bearings
Address: 5000 Chestnut Ave. , Newport News, Virginia USA 23605
Telephone: 757-247-6000
FAX: 757-247-6300

ETS Power Group

Business type: manufacturer, wholesale supplier
Product types: gas turbine electric generators, cogeneration system components, AFTERMARKET GAS TURBINE REPLACEMENT PARTS - BUCKETS, NOZZLES, BLADES, VANES, COMBUSTION SYSTEMS, ALL MAKES ENGINEERED--GE, WEST, ABB, SIEMENS, ALSTOM.
Address: 2400 SE Monterey Road, Suite 101, Stuart, Florida USA 34996
Telephone: +1 772.781.3883

McMillan Company

Business type: manufacturer
Product types: fuel cell system components, water filtering and purification system components, cogeneration system components, meters and measuring equipment.
Address: 7075 RR 2338, Georgetown, Texas USA 78628
Telephone: 800-861-0231, 512-863-0231

Metex Corporation

Business type: manufacturer
Product types: cogeneration system components, hydro energy system components (large), air filtering and purification system components, geothermal energy system components, computer and electronic components, water filtering and purification system components, Seals, Breathers, Coalescers, Filters, Mufflers, Gaskets, Noise Attenuators.
Address: 970 New Durham Road, Edison, New Jersey USA 08818
Telephone: 732-287-0800

Sunpower Inc

Sunpower is the world's leading developer of free-piston machines. For over 30 years, Sunpower has provided collaboration, design, application and commercialization of our unique technology to clients worldwide. Today, Sunpower-enabled products include innovative Stirling engines, coolers, cryocoolers and compressors integrated into environmentally friendly, long-lived, high efficiency solutions. Applications include household refrigerators and cogeneration units, aerospace and military electric generators, medical devices, and nuclear material detection devices. Sunpower offers technology partnering opportunities, research and development expertise, and a range of high-performing cryocoolers.

Business type: Engineering, Cryocooler Manufacturer
Product types: cogeneration system components, remote home power systems, backup power systems, thermoelectric power conversion, biomass energy system components, air cooling system components, Cryocoolers Using technology related to: * Free-piston Stirling engines * Cryocoolers * Pulse Tubes * Linear compressors.
Service types: engineering, research services
Address: 184 Mill Street, Athens, Ohio USA 45701
Telephone: 7405942221
FAX: 7405937531

Warren Environmental Equipment Inc.

Business type: manufacturer
Product types: biomass energy system components, air filtering and purification systems, air filtering and purification system components, cogeneration system components, geothermal energy system components, heat exchangers, Air Pollution Control Systems.
Address: 5075 Roswell Road, Atlanta, Georgia USA 30342
Telephone: 4048438333

Not Listed? Add your business listing to the Source Guides business directory

Can't Find It? Search the entire Source Guides site using keywords: